How to connect the printer via Wi-Fi?
If you have your own printer with the ability to communicate over WiFi, and you are going to connect it via a Wifi access point, you will have to work hard. So, speaking about how to connect the printer via WiFi, we note that it is impossible to do this directly, but if there is a USB cable, then everything is easy and simple. Difficulties may occur when setting up a WiFi access point. Often, users do it incorrectly, so below we will provide you with detailed instructions on how to connect the printer via WiFi.
Wifi Printer Connection Procedure
Consider the detailed step by step instructions:
- Turn on the printer by selecting the "options" and the next Wi-Fi connection point.
- Choose a Wi-Fi router, click "YES". Then choose “quick setup”.
- Enter the encryption key of the wireless network Wi-Fi, which we previously asked, setting up a Wi-fi router.
- We check and then confirm the WEB key entered by us. And when the printer is connected, it will flash in blue.If this does not happen, then recheck the key that you enter again, because, most likely, there is an error.
- We insert drivers, they went complete with the printer, and we start.
- Select "Easy installation", then everything is unchanged and select "Install". After that, choose the second option if you connect via a USB cable, and the first option if you connect via Wi-Fi or a network cable.
- Click "Next" to start the driver installation process. After that, the search for the printer on the network will begin, and then click "Next" again.
- After finding your printer on the network, click "Next." Then the registration of the printer driver itself begins.
- Now we only need to measure the performance of the wireless Wi-Fi connection. Put a tick and click "Next". And if the connection is good, then insert the paper and print out the files of interest to us. If the connection is bad, which happens very rarely, you will have to wait until it is normalized and only after starting the printer to print the files. It does not take long, so do not worry.
Now you will have no difficulty in how to connect the printer via WiFi.After all, the instruction is quite simple and accessible to everyone. And all of its implementation will take no more than half an hour. But you should not treat such instructions formally, remember that the exact implementation will help you to do this work successfully and without negative consequences for your equipment. It’s hard to imagine a person who can do everything right without instructions, agree. Although, perhaps, such craftsmen are.