How to properly install a fence from Rabitza own hands?
Buying a site, we always trydesignate its boundaries, separating from its neighbors. Even if nice people live next to each other, the land is still divided by a bush or a rain groove. It does not matter which material you decide to use for your fence. In today's list, represented on the market, there are a huge number of them. For each option has its advantages. Cons also can be found in any performance of the fence.
Begin with the definition of the result,which you want to receive. If you need to close the entire territory of the site from evil eyes, then you can install a solid fence. Here, suitable profiled sheets, wooden boards, bricks or welded sections. They allow you to erect a protective bastion around your house.
But if you are not a supporter of deaf facilities, andThe fencing you need to protect your garden from random animals, it is enough to choose a fence from the rabitsa. With his own hands it can be installed, even without special skills. The technology of its installation provides for several stages.
Step 1. Determine the length of the future fence, measuring the boundaries of the plot, taking into account all the irregularities and turns. The mesh fence is available in rolls or supplied in sections of different sizes.
Step 2. We calculate the required number of poles. In order to avoid sagging, it is recommended to put the pivot points so that the distance between them does not exceed 3 m. For the sectional version we take into account the dimensions of the finished section. Having conceived to install a fence on your site with your own hands, pay attention to the mesh holder.
Step 3. Selecting poles to fix the fence. Here we draw attention to the installation of the support itself and the fixation of the grid. The prepared log can cost less, it is easier to work with, but it is less durable. Metal poles are produced with hooks, which allow you to fix the canvas. They will last much longer, but they also cost more.
Step 4. Select the material. Fences from the slab are conditionally divided into tension and sectional. In the first case, after determining the necessary amount of material, buy a roll. In the market you can buy galvanized mesh, not zinced and protected by a polymer coating. The color of the polymer allows you to give your fence a pleasant shade. If the site has flat sides and small dimensions, then the fence can be mounted from the rabits with your own hands in 2 days. Especially if you use ready-made sections with a set of poles and fasteners.
Step 5. Having bought all the necessary material, we begin assembling the fence. First of all, we establish poles along the perimeter of the site. Then determine the location for the intermediate supports, based on the dimensions of the section or the length of the side of the section. Pillars can be dug, reinforced with stones, or poured with cement.
After the installation of the support points, we begin to pullcanvas cloth. In order for it to last longer, it is possible to pass a rod into the upper cells or from below. This will allow you to stretch the grid better. In places where there are bends or irregularities, it is better to install additional poles. The height of the grid reaches sometimes 2 meters, but it should always be less than the length of the reference point.
It does not matter which option you choose to mount the fence from the rabitsa with your own hands. To get the desired result, take into account at the marking the places reserved for the gate and gate.